sadsad x
push-1-ürün.jpg (811 KB)

Planet PL-BSP-360 Endüstriyel Tip Yönetilebilir Enerjiden Beslenen Yönetilebilir PoE+ Switch (Industrial Renewable Energy PoE+ Managed Ethernet Switch)

Ürün Kodu : TPX8333   Stok Mevcut *

icon_kargo_Bedava Ücretsiz
icon_ayni_Gun_Kargo Kargo Süresi
Aynı Gün Kargo
Tek Çekim
5.560,83 TL (KDV Dahil)
5.505,22 TL (KDV Dahil)

Aynı gün kargo, Saat 14:00'e kadar verilen siparişler için geçerlidir.
Pandemi sebebiyle kargo firmasından kaynaklı 1 günlük gecikmeler olabilir.
  • Ürün Özellikleri
  • Ödeme Seçenekleri
  • Yorumlar (0)
  • Tavsiye Et
  • Resimler
  • Beni Ara

  • Physical Port

    • 5-port 10/100/1000BASE-T Gigabit RJ45 copper with 4-port IEEE 802.3at/af PoE Injector (Port 1 to Port 4)
    • RJ45 type interface for basic management and setup
    • USB type A female for setting file backup and restore

    Power over Ethernet

    • Complies with IEEE 802.3at Power over Ethernet Plus end-span PSE
    • Backward compatible with IEEE 802.3af Power over Ethernet
    • Up to 4 ports of IEEE 802.3af/802.3at devices powered
    • Supports PoE power up to 30 watts for each PoE port
    • Auto detects powered device (PD)
    • Circuit protection prevents power interference between ports
    • Remote power feeding up to 100 meters
    • PoE management
      - Total PoE power budget control
      - Per port PoE function enable/disable
      - PoE port power feeding priority
      - Per PoE port power limitation
      - PD alive-check
      - PoE schedule

    Battery Management

    • Battery type option: Nickel-cadmium battery or lead-acid battery
    • Easy diagnostic of the system operating status via LED indicator
    • Battery current usage and status
    • Battery capacity and power consumption statistics
    • Low voltage cut-off protection: Send alert and cut off the low priority PoE port for the low power battery
    • Pulse Width Modulation (PWM) Protection
      - Reverse current protection to prevent the current circuits from flowing back to the PV panel
      - Over-current and over-temperature protection
      - Reverse polarity protection (for battery and charging electrodes)

    Industrial Case & Installation

    • IP30 aluminum case
    • DIN-rail and wall-mounted design
    • Supports -10 to 60 degrees C operating temperature
    • Supports ESD 6KV DC Ethernet protection
    • Redundant power design
      - 24V~45V DC wide power input


    • Hardware based 10/100Mbps (half/full duplex), 1000Mbps (full duplex), auto-negotiation and auto MDI/MDI-X
    • Features Store-and-Forward mode with wire-speed filtering and forwarding rates
    • IEEE 802.3x flow control for full duplex operation and back pressure for half duplex operation
    • 8K MAC address table size
    • Automatic address learning and address aging


    • Internet types: Dynamic IP, static IP, PPPoE, L2TP, PPTP
    • Static and dynamic (RIP1 and 2) routing
    • IP/MAC-based bandwidth control
    • Supports Port Forwarding, DMZ, UPnP and Dynamic DNS for various networking applications
    • 802.1d STP and IGMP Proxy


    • Port filtering lets you either allow or prevent which applications can access the Internet.
    • MAC filtering allows you to include or exclude computers and devices based on their MAC address
    • URL filtering allows you to control access to Internet websites in an URL list
    • IP source guard prevents IP spoofing attacks
    • DoS attack prevention


    • Switch Management Interface
      - IPv4 Web switch management- SNMP v1, v2c
    • Static and DHCP for IP address assignment
    • System Maintenance
      - Firmware upload/download via HTTP
      - Configuration upload/download through HTTP
      - Hardware reset button for system reboot or reset to factory default
    • NTP Network Time Protocol
    • SNMP trap for interface Link Up and Link Down notification
    • Event message logging to remote syslog server
    • PLANET Smart Discovery Utility

    Hardware Specifications
    Copper Ports LAN: 5 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 1 to Port 5, bridge mode)
    WAN: 1 10/100/1000Mbps auto MDI/MDI-X RJ45 port (Port 5, gateway mode)
    PoE Injector Port 4 ports with 802.3af/802.3at PoE injector function (Port 1 to Port 4)
    USB 1 USB Type A female for setting backup
    Power Output 4 PoE out 51VDC; max. 30 watts per PoE port
    2 DC out 24@ 1A maximum (four-pin terminal block)
    * The voltage of DC out is based on the battery.
    Switch Architecture Store-and-Forward
    Switch Fabric 10Gbps/non-blocking
    Switch Throughput@64 bytes 5.95Mpps@64 bytes
    MAC Address Table 8K entries
    Shared Data Buffer 512Kbit
    Flow Control IEEE 802.3x pause frame for full-duplex
    Back pressure for half-duplex
    Reset Button &< 5 sec: System reboot
    &> 5 sec: Factory default
    LED 3 LEDs for System and Power:
    • Green : Power
    • Green : Fault
    • Green : System

    4 LEDs for PoE Copper Ports (Port 1~Port 4):
    • Green : LNK/ACT
    • Orange : PoE-in-use

    1 LED for 10/100/1000T Copper Port (Port 5):
    • Green : LNK/ACT

    3 LEDs for PoE Power Usage (W)
    • Green : 50, 100 and 120W
    Connector Removable 6-pin terminal block
    Pin 1/2 for PV panel; Pin 3/4 for alarm; Pin 5/6 for battery
    Alarm 1 Digital Output (DO):
    Level 0: -24V~2.1V (±0.1V)
    Level 1: 2.1V~24V (±0.1V)
    Open collector to 24V DC, 100mA max.
    Power Requirements PV in: 24~45V DC
    Battery in/out: 24V DC
    Power Consumption/ Dissipation 5.04 watts, 17.1BTU (Standby without PoE function)
    6.96 watts, 23.7 BTU (Full loading without PoE function)
    135.36 watts, 461.5 BTU (Full loading with PoE function)
    Dimensions (W x D x H) 84 x 107 x 152 mm
    Weight 1026g
    ESD Protection 6KV DC
    Enclosure IP30 aluminum case
    Installation DIN-rail kit and wall-mount ear
    Power over Ethernet
    PoE Standard IEEE 802.3af/802.3at Power over Ethernet PSE
    PoE Power Supply Type End-span
    PoE Power Output Per port 51V DC, 275mA. Max. 15.4 watts (IEEE 802.3af)
    Per port 51V DC, 535mA. Max. 30 watts (IEEE 802.3at)
    Power Pin Assignment 1/2 (+), 3/6 (-)
    PoE Power Budget 120 watts (PoE consumption + DC out and depending on power input)
    Max. Number of Class 2 PDs 4
    Max. Number of Class 3 PDs 4
    Max. Number of Class 4 PDs 4
    Electrical Characteristics
    System Voltage Rating 24V DC
    Maximum Charging Current 6A
    Max. Solar Array VOC 60V DC
    Max. Operating Voltage 45V DC
    Total Current Consumption While operating -32mA
    At idle -11mA
    High Temperature Shutdown 100 degrees C disconnect solar and load
    80 degrees C reconnect solar and load
    Battery Charging Characteristics
    Charge Algorithm Bulk charge (constant current), Absorption charge (constant voltage) and Floating charge. Absorption and Floating charge with PWM protection.
    Maximum Output Current 6A
    Nickel-cadmium Battery ± 40 mV/degrees Celsius for NiCad type batteries; charge cut-off @ 55 degrees C
    (Temperature compensation baseline@ 25 degrees C)
    Lead Acid Battery (Default Setting) ± 60 mV/degrees Celsius for lead acid type batteries; charge cut-off @ 55 degrees C
    (Temperature compensation baseline@ 25 degrees C)
    Float Charge Voltage DC 27.2V (26.0~30.0V)
    Absorption Charge Voltage DC 29.2V (28.0~32.0V)
    LVD (Low Voltage Disconnection) DC 22.2V (21.0~25.0V)
    LVR (Low Voltage Reconnection) DC 24.8V (23.0~27.0V)
    Router Features
    Internet Connection Type Shares data and Internet access with users, supporting the following internet accesses:
    • PPPoE
    • Dynamic IP
    • Static IP
    • PPTP
    • L2TP
    Firewall NAT firewall with SPI (Stateful Packet Inspection)
    Built-in NAT server supporting Port Forwarding, and DMZ
    Built-in firewall with IP address/MAC address/Port/ URL filtering
    Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter, DoS protection
    Routing Protocol Static/Dynamic (RIP1 and 2) routing
    VPN Pass-through PPTP, L2TP, IPSec, IPv6
    LAN Built-in DHCP server supporting static IP address distribution
    Supports UPnP, Dynamic DNS
    Supports IGMP Proxy
    Supports 802.1d STP (Spanning Tree)
    IP/MAC-based bandwidth control
    Management Interface Setup of system/management functions
    Web firmware upgrade
    SNMP trap for alarm notification of events
    PoE Management Power limit by consumption and allocation
    PoE admin mode
    Per port power schedule
    Per port power enable/disable
    Power feeding priority
    Current per port usage and status
    Total power consumption
    PD alive check
    Scheduled power recycling
    Battery Management Battery current usage and status
    Battery capacity statistics
    Low Voltage Cut-Off Protection
    Standards Conformance
    Regulatory Compliance FCC Part 15 Class A, CE
    Standards Compliance IEEE 802.3 10BASE-T Ethernet
    IEEE 802.3u 100BASE-TX Fast Ethernet
    IEEE 802.3ab 1000BASE-T Gigabit Ethernet
    IEEE 802.3x Flow Control and Back Pressure
    IEEE 802.1D Spanning Tree Protocol
    IEEE 802.3af Power over Ethernet
    IEEE 802.3at Power over Ethernet Plus
    RFC 768: UDP
    RFC 791: IP
    RFC 2068 HTTP
    RFC 1157: SNMP v1
    RFC 1902: SNMP v2c
    RFC 5424: Syslog
    Operating Temperature: -10 ~ 60 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)
    Storage Temperature: -10 ~ 70 degrees C
    Relative Humidity: 5 ~ 95% (non-condensing)

    Endüstriyel Tip Yenilenebilir Enerjiden Beslenen Yönetilebilir PoE+ Switch (Industrial Renewable Energy PoE+ Managed Ethernet Switch)
    5-Port 10/100/1000Base-TX RJ-45 (Port 1 to Port 5, bridge mod) (Port 5, gateway mod) with 4-Port IEEE 802.3at/af PoE+ Injector (Port 1 to Port 4) (Per port 30.8 watt)
    2-Port 1000BASE-SX/LX/BX SFP/mini-GBIC yuva (Port-9 ve Port-10), 100Base-FX SFP uyumlu
    1 x RJ45 port (management)
    1 x USB port (backup)
    IP30, -10~60 Derece C
    PoE Power Usage Display
    Ürünlerimizin tümü marka garantilidir,
    Teknolojipazar, ürünlere ait teknik detaylar için markaya ait web sayfasından ürün özelliklerini incelemenizi önermektedir.
T-Soft E-Ticaret Sistemleriyle Hazırlanmıştır.