- Ürün Özellikleri
- Ödeme Seçenekleri
- Yorumlar (0)
- Tavsiye Et
- Beni Ara
MOBILE Mobile module LTE (Cat M1) / NB-IoT / EGPRS SIM switch 2 SIM cards, auto-switch cases: weak signal, data limit, SMS limit, on roaming, no network, network denied, data connection fail Status Signal strength (RSSI), SINR, RSRP, RSRQ, EC/IO, RSCP Bytes sent/received, connected band, IMSI, ICCID. SMS/Call SMS status, SMS configuration, send/read SMS via HTTP POST/GET, EMAIL to SMS, SMS to EMAIL, SMS to HTTP, SMS to SMS, scheduled SMS, SMS autoreply, Call utilities USSD Supports sending and reading Unstructured Supplementary Service Data messages Black/White list Operator black/white list Band management Used band status display, Band lock APN Auto APN Bridge Direct connection (bridge) between mobile ISP and device on LAN Multiple PDN Possibility to use different PDNs for multiple network access and services ETHERNET LAN 1 x LAN port 10/100 Mbps, comply IEEE 802.3, IEEE 802.3u standards, supports auto MDI/MDIX crossover (Configurable to work as WAN port) NETWORK Routing Static routing, Dynamic routing (BGP, OSPF v2, RIP v1/v2) (planned) Network protocols TCP, UDP, IPv4, IPv6, ICMP, NTP, DNS, HTTP, HTTPS, FTP, SMTP, SSL v3, TLS, ARP, PPP, SSH, DHCP, Telnet, MQTT, Wake On Lan (WOL) VoIP passthrough support (planned) H.323 and SIP-alg protocol NAT helpers, allowing proper routing of VoIP packets Connection monitoring Ping Reboot, Periodic Reboot, LCP and ICMP for link inspection Firewall Port forward, traffic rules, custom rules DHCP Static and dynamic IP allocation, DHCP Relay QoS / Smart Queue Management (SQM) (planned) Traffic priority queuing by source/destination, service, protocol or port, WMM, 802.11e DDNS Supported >25 service providers, others can be configured manually SSHFS Possibility to mount remote file system via SSH protocol SECURITY Authentication Pre-shared key, digital certificates, X.509 certificates Firewall Pre-configured firewall rules can be enabled via WebUI, unlimited firewall configuration via CLI; DMZ; NAT; NAT-T Attack prevention DDOS prevention (SYN flood protection, SSH attack prevention, HTTP/HTTPS attack prevention), port scan prevention (SYN-FIN, SYN-RST, X-mas, NULL flags, FIN scan attacks) VLAN (planned) Tag based VLAN separation Mobile quota control Custom data limits for both SIM cards WEB filter (planned) Blacklist for blocking out unwanted websites, Whitelist for specifying allowed sites only Access control Flexible access control of TCP, UDP, ICMP packets, MAC address filter VPN OpenVPN Multiple clients and server can be running simultaneously, 12 encryption methods OpenVPN Encryption DES-CBC, RC2-CBC, DES-EDE-CBC, DES-EDE3-CBC, DESX-CBC, BF-CBC, RC2-40-CBC, CAST5-CBC, RC2-64-CBC, AES-128-CBC, AES-192-CBC, AES-256-CBC IPSec IKEv1, IKEv2, with 5 encryption methods (DES, 3DES, AES128, AES192, AES256) GRE GRE tunnel Stunnel (planned) Proxy designed to add TLS encryption functionality to existing clients and servers without any changes in the program’s code PPTP, L2TP Client/Server services can run simultaneously, L2TPv3 support DMVPN (planned) Method of building scalable IPsec VPNs SSTP (planned) SSTP client instance support ZeroTier ZeroTier VPN client support WireGuard WireGuard VPN client and server support SERIAL COMMMUNICATION MODES Modes Console, OverIP, Modem (Full or Partial control), MODBUS RTU master, MODBUS gateway, NTRIP client (planned) MODBUS MODBUS TCP SLAVE ID filtering Respond to one ID in range [1;255] or any Allow remote access Allow access through WAN Custom registers MODBUS TCP custom register block, which allows to read/write to a file inside the router, and can be used to extend MODBUS TCP slave functionality MODBUS TCP MASTER Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII MODBUS RTU MASTER Supported baud rates From 300 to 3000000 Supported functions 01, 02, 03, 04, 05, 06, 15, 16 Supported data formats 8 bit: INT, UINT; 16 bit: INT, UINT (MSB or LSB first); 32 bit: float, INT, UINT (ABCD (big-endian), DCBA (little-endian), CDAB, BADC), HEX, ASCII Number of data bits 7 or 8 Number of stop bits 1 or 2 Parity bits None, Even, Odd Flow control None, RTS/CTS (only for RS232 interface), Xon/Xoff MQTT GATEWAY Gateway Allows sending commands and receiving data from MODBUS Master trough MQTT broker DNP3 Supported modes TCP Master, DNP3 Outstation, RTU Master DATA TO SERVER Protocols HTTP(S), MQTT, Azure MQTT, Kinesis MONITORING & MANAGEMENT WEB UI HTTP/HTTPS, status, configuration, FW update, CLI, troubleshoot, event log, system log, kernel log FOTA Firmware update from server, automatic notification SSH SSH (v1, v2) SMS SMS status, SMS configuration, send/read SMS via HTTP POST/GET TR-069 OpenACS, EasyCwmp, ACSLite, tGem, LibreACS, GenieACS, FreeACS, LibCWMP, Friendly tech, AVSystem MQTT MQTT Broker, MQTT publisher SNMP SNMP (v1, v2, v3), SNMP Trap JSON-RPC Management API over HTTP/HTTPS MODBUS MODBUS TCP status/control RMS Teltonika Remote Management Systems (RMS) IoT PLATFORMS Cloud of Things Allows monitoring of: Device data, Mobile data, Network info, Availability ThingWorx Allows monitoring of: WAN Type, WAN IP Mobile Operator Name, Mobile Signal Strength, Mobile Network Type Cumulocity Allows monitoring of: Device Model, Revision and Serial Number, Mobile Cell ID, ICCID, IMEI, Connection Type, Operator, Signal Strength, WAN Type and IP Azure IoT Hub Can send device IP, Number of bytes send/received/ 3G connection state, Network link state, IMEI, ICCID, Model, Manufacturer, Serial, Revision, IMSI, Sim State, PIN state, GSM signal, WCDMA RSCP, WCDMA EC/IO, LTE RSRP, LTE SINR, LTE RSRQ, CELL ID, Operator, Operator number, Connection type, Temperature, PIN count to Azure IoT Hub server SYSTEM CHARACTERISTICS CPU Qualcomm QCA9531, MIPS 24kc, 650 MHz RAM 64 MB, DDR2 Flash storage 16MB SPI Flash (4 MB available for user) FIRMWARE / CONFIGURATION WEB UI Update FW from file, check FW on server, configuration profiles, configuration backup FOTA Update FW/configuration from server RMS Update FW/configuration for multiple devices Keep settings Update FW without losing current configuration FIRMWARE CUSTOMIZATION Operating system RutOS (OpenWrt based Linux OS) Supported languages Busybox shell, Lua, C, C++ Development tools SDK package with build environment provided LOCATION TRACKING GNSS GPS, GLONASS, BeiDou, Galileo and QZSS Coordinates GNSS coordinates via WebUI, SMS, TAVL, RMS NMEA NMEA 0183 NTRIP (planned) NTRIP protocol (Networked Transport of RTCM via Internet Protocol) Server software Supported server software TAVL, RMS Geofencing Configurable multiple geofence zones INPUT/OUTPUT Configurable I/O 3 x Configurable Inputs/Outputs. Digital input 0 - 6 V detected as logic low, 8 - 30 V detected as logic high. Open collector output, max output 30 V, 300 mA Analog input 1 x Analog input (0 - 30 V) Output control HTTP POST/GET, Schedule Events SMS, Email I/O juggler Allows to set certain I/O conditions to initiate event SERIAL RS232 Terminal block connector: TX, RX, RTS, CTS RS485 Terminal block connector: D+, D-, R+, R- (2 or 4 wire interface) Supported baud rates From 300 to 3000000 Number of data bits 7 or 8 Number of stop bits 1 or 2 Parity None, Even, Odd Flow control None, RTS/CTS (only for RS232 interface), Xon/Xoff POWER Connector 2 pins in 16 pin industrial terminal block Input voltage range 9 – 30 VDC, reverse polarity protection, surge protection +/-1 kV 50 µs max Power consumption Idle: <1.2 W, Max: <5 W PHYSICAL INTERFACES (PORTS, LEDS, ANTENNAS, BUTTON, SIM) Ethernet 1 x RJ45 port, 10/100 Mbps I/O’s 3 x Configurable I/O, 1 x Analog input in 16 pin terminal block Status LEDs 3 x connection status LEDs, 3 x connection strength LEDs, 1 x power LED, 1 x Eth port status LED SIM 2 x SIM slots (Mini SIM – 2FF), 1.8 V/3 V, double stacked SIM tray Power 2 pins in 16 pin terminal block Antennas 1 x SMA connector for Mobile, 1 x SMA connector for GNSS RS232 4 pins in 16 pin terminal block (TX, RX, RTS, CTS) RS485 4 pins in 16 pin terminal block (D+, D-, R+, R-) Reset Reboot/User default reset/Factory reset button PHYSICAL SPECIFICATION Casing material Aluminium housing with DIN rail mounting option Dimensions (W x H x D) 83 x 25 x 74.2 mm Weight 165 g Mounting options DIN rail, wall mounting (additional kits needed), flat surface placement OPERATING ENVIRONMENT Operating temperature -40 ℃ to 75 ℃ Operating humidity 10% to 90% non-condensing
Ürünlerimizin tümü marka garantilidir,
Teknolojipazar, ürünlere ait teknik detaylar için markaya ait web sayfasından ürün özelliklerini incelemenizi önermektedir.